Ask your plants where the energy goes.
HVAC is a building’s largest single load. Meddle attributes it zone by zone and machine by machine, measures the baseline and shows you the saving on the bill. No dashboards to build, no vendor module to pay for.
Consumption you cannot see
One meter upstream: below the macro area, zone and machine are invisible.
Fragile baseline
Without history by zone, the “before” of a project is reconstructed after the fact.
Hostage to the vendor
The BMS analytics module is a separate license, often tens of thousands of euros.
From baseline to saving, measured.
Baseline, intervention, measurement.
Baseline
Built on the plant’s real data, by zone and by asset. Not reconstructed after the fact.
Intervention
Optimized set-points and scheduling. Suggested first, then automatic with your approval.
Measurement
Saving verified on the bill, with the same method. EnPI and reports ready for ISO 50001.
The pilot measures the saving before you sign.
One zone or one line, read only, 2-4 weeks. You see the baseline and the real saving on your bill before any commitment. No black box, no hardware to start.
What we do not do.
We do not sell hardware. We work on the meters and sensors you have. Where the measurement is missing, a partner installs a meter, only where it is needed.
We do not replace the BMS. We feed it: we add the governance and the attribution it does not have today.
We do not promise percentages up front. The pilot measures the saving on your data. If it does not add up, you know before signing.
The rest, in short.
I run a factory, not a building.
Same scheme. Instead of HVAC zones, Meddle attributes consumption to the energy-intensive loads (compressors, chillers, ovens) and optimizes on hourly prices.
I am an ESCo or an EGE consultant.
Separate environments and permissions by role: each customer sees only their own plants. The per-asset measurements, timestamped, are usable for M&V.
How does it hook into ISO 50001 and EnPI?
The same data behind the attribution by zone and by machine generates EnPI and reports, with no manual collection. Reporting stops being an Excel job.
Does the data stay mine?
Yes. It stays in Europe and it stays yours. The platform is NIS-2 ready.
We connect one zone. You see the rest.
In less than 20 minutes, from consumption you cannot see to the figure by zone and by machine.
Book a demo